Difference Between High & Low Beam Headlights - Sunway Autoparts

What Is The Difference Between High And Low Beam Headlights

Home What Is The Difference Between High And Low Beam Headlights

Every element in a car is there to ensure the occupants’ safety and comfort. Headlights are the same. These headlamps help you see at night. They also have two modes: low and high beam.

It is important to understand how modern headlights work, as opposed to the old oil lamp in a lantern with a reflector.

There are several varieties of headlights; some headlights come in a variety of colors too. But the basic functions are the same. Before launching a car light business or ordering a part from auto headlight manufacturers, every B2B company should know what’s the difference between high beam and low beam led headlights and how high beam and low beam are needed features to make the vehicle functional.

But what’s the difference between high beam and low beam headlights? What is high beam light? Is it just a matter of functionality, or are there additional important distinctions?

What Are Low Beam Headlights?

high beam and low beam lights
Source: Pexels

Low-beam headlights illuminate a tiny area in front of you, roughly 200 feet in most cases. Low beams direct more-light toward the ground, minimizing the amount of light that reaches the eyes of approaching drivers in the dark. This means your lights aren’t blinding the other vehicle, making both of you safer.

Because of the reduced amount of light output and the direction in which the light points, low beam headlights are ideal for driving in traffic. The idea is to provide enough light for you to see where you’re going and what’s on the road in front of you without blinding anyone approaching from behind.

According to studies on motorcycle safety, utilizing low beam headlights, rather than fog lights, improves motorcycle drivers’ visibility to other drivers. That implies that turning on your low beam headlights during the day makes it simpler for other drivers to see you, especially in congested areas.

When To Use Low Beam Headlights?

high beam and low beam lights
Source: Pexels

Low beam headlights, unlike signal lights, provide illumination to a narrow area (approximately 200′) while limiting the amount of light that reaches the eyes of other vehicles. Low beams provide a short-range light that is great for driving in traffic when you don’t want your brilliant high beams to blind other drivers.

Low beam lights should be used when driving in fog, rain, or thick snow. For cutting through these low-visibility situations, downward focused light is optimal. You might believe that turning on your high beams will help you see better, but the light is reflected back to you, generating a glare.

Glare can be caused by the light from beam headlights. When you meet oncoming traffic or approach another vehicle from behind, you must use low beam headlights. Low beams should also be used in well-lit regions, such as cities. When driving in fog, heavy rain, or snow, you should use low beams to avoid blinding yourself.

Remember to slow down when driving in severe weather or with only your low beam headlights turned on. Because you can’t stop quickly, you’ll need to increase your following distance. Always gather knowledge about when to use when to use low beam and high beam headlights and retain a safe following distance and never overdrive your headlights.

What Are High Beam Headlights?

high beam and low beam lights
Source: Pexels

High beam headlights illuminate a large area with a strong light (about 350-400 feet), with no restrictions on the amount of light directed at other cars. Although high beam headlights are best reserved for instances where you are traveling alone on the road, they might be useful along with a car tail light, when traveling on dark roads. The additional light will allow you to see further down the road as well as more clearly along the sides of the road. This is especially useful on rural roads where there may be wild creatures hiding around the corner.

As long as there is no other traffic, you might use your high beams on highways as well as on city streets. Make sure to switch to your low beam lights whenever a car approaches you from behind, whether you’re driving on a country road or a major thoroughfare. For some drivers, the bright light from high beams can be particularly blinding, impairing their ability to see clearly. So, it is extremely crucial for a business to know the basic differences of low beam vs high beam.

When To Use High Beam Headlights?

high beam and low beam lights
Source: Pexels

When driving, you may find yourself on a darkened city street, an unknown road, or a construction zone. It’s disconcerting to realize you can’t see where you’re going. In metropolitan regions, state law normally requires you to decrease highlights between 300 and 999 feet of approaching autos. When you’re near 250 – 300 feet of the automobile you’re following, especially at stop signs and traffic lights, you should dim them.

There may be reduced vision on several interstate roads, as well as their on- and off-ramps. Your headlights may be the only source of illumination for long stretches of road. In low-visibility situations, use your high-beam headlights to improve your sight range. Check with your local DMV of your place for the exact distance your state requires. When overtaking another vehicle from behind on an interstate highway, in a rest area, or at a toll plaza, always lower your high lights to avoid blinding the driver.

High-lights also assist you to avoid hitting animals, bicyclists, or pedestrians out for a late-night stroll in rural regions. While country roads may appear to be abandoned, be prepared to immediately decrease your high lights when approaching another vehicle from behind. You will be safeguarding other drivers by decreasing your high beams. So, always try to maintain a safe following distance and never forget about when to use low and high beam headlights

High Beam vs Low Beam Symbol:

high beam and low beam lights
Source: Pexels

Previously, high-beam and low-beam light bulbs were sold separately along with other car body parts and accessories. Most modern automobiles employ a single bulb with two filaments that can adjust brightness levels between “high” and “low.” A filament is a “shiny” conducting wire in a bulb. Two different bulbs are still used in some luxury and military cars. As a result, understanding the fundamental differences between low beam vs high beam headlights symbols is critical for every organization.

Low-beam lights allow you to see up to 200 feet ahead of you, while high-beam lights often allow you to see 350-400 feet ahead of you. Low-beam lights are focused lower, toward the road surface, and high-beam lights are pointed straight ahead.

High Beam Symbol: The high beam symbol is a blue symbol that comes with five horizontal lines which are piled vertically to the left of a headlight-like form. This will light up on the dashboard to let you know that your high beams are on. This indicator will turn off once the high beams have been switched off.

Low Beam Symbol: When you turn on your low beam headlights, the low beam sign has its rays pointing downwards. Low beams are more inclined to face the ground than forward. It’s not the same as the high beam symbol.

Key Difference Between High Beam and Low Beam:

high beam and low beam lights
Source: Pexels

Many people do believe that the difference in brightness between the high and low beam settings on automobile headlights is all there is to it. There’s more to the difference between high beam and low beam than this. Look into this comparison to get an idea about various headlight types

Parameters of Comparison:High BeamsLow Beams
Suitability:When a driver is aloneWith the presence of other vehicles
Blinding the drivers:YesNo
Beam angle:UpwardsTowards the road
Usage:Cannot be used in fog, rain, and snowCan be used in fog, rain, and snow


In summary, low beam headlights are used for city driving and situations where visibility is limited by rain, smoke, snow, fog, or dust. Low beams steer the headlights away from the oncoming lane of traffic to avoid glare.

Low beam is also suited for places where daytime driving is required. This increases your visibility on the road, even in the daytime. High beams are designed for usage on dark roads without street lights. High beams can harm your eyesight, driving skills, and other road users’ safety.

Understanding the impacts of high and low beams, as well as when and when to use each, and to increase road safety by auto headlight manufacturers like Sunway Autoparts, who are specialists in classic vehicle parts, has been setting the benchmark for spare parts in terms of quality, innovation, and supply chain competency since 2007. So if you are interested in purchasing any auto parts, please do contact us on the official website.

Get A Free Quote